Main Activities ICC has
been engaged in the activities for Construction in the Power and
Industrial sector for the last 56 years. The main fields of its
operation are briefed below.
Transmission Lines up
to 500 KV Hydel Power Plants Substation up to 500 KV Thermal Power
Plants Gas Turbines Power Plants Steel Making Plants Process Industrial
Plants Water Desalination Plants Water Supply Systems Wind Power Plants
Solar Power Plants Pipeline of various Diameters and Pressure to carry
Steam, Oils, Gases, Water etc. Underground High Voltage Cable Network.
Fabrication and Erection of Large Capacity Storage Tanks Fabrication and
Erection of Large Diameter Pipelines Fabrication and Erection of Steel
Structures, Ducting, Platforms Stairs etc. Communication Systems.
ICC is primarily an
Engineering based company which has always stressed upon the highest
standards of technical quality. It owns an independent Design Group
composed of highly qualified Engineers who are kept upto date and well
conversant in the latest design techniques. Most of ICC’s Engineers have
been trained abroad and an atmosphere of on the job training is
prevalent among all its personnel. A number of Engineers trained by ICC
form the nucleus of many companies working on transmission line
construction outside Pakistan, thereby earning precious foreign exchange
for the country. ICC has design capabilities in the following fields.
Civil Works. Tower Design. Profile & Tower spotting. Conductor Size
configuration. Sag & Tension calculations.
Civil works. Mechanical
works. Bus Bar protection. Switchyard Equipment protection. Line
protection. Transformer/Reactor protection. Lightning protection.
Grounding system. Synchronising system. DC power system. Line/Reactance
metering. Switchgear control. Fire fighting. Lighting.
Monitoring for Turbines, Generators & Transformers. Unit protection
metering. Recording. Synchronising. AC system. DC system.
ICC has the capability
of handling all phases of construction of transmission lines. ICC
specialises in the Design, Furnishing of materials, Erection, Testing
and Commissioning of a complete Transmission Line System. To date, over
10,000 Km of Distribution and Transmission Lines ranging from 11 KV to
500 KV have been constructed by ICC. Their highly qualified and
experienced engineers, supervisors and technicians are capable of
handling all projects in an expeditious manner.
The attached brochure,
among other things, gives the information about their key technical
personnel and list of transmission line projects completed by them.
ICC owns two complete
sets of tension stringing equipment suitable for 4 Bundle conductor.
Details of other tools and plants for survey, tower foundation, tower
erection and stringing operations available with them are given in the
ICC has completed many
transmission lines upto 220KV for WAPDA on turnkey basis. Most of the
transmission lines upto 220KV in KESC system have been built by ICC on
turnkey basis. Even now ICC is executing a project in WAPDA/KESC on
turnkey basis for transmission lines upto 220KV.
ICC has large
experience in the design, supply, erection, testing and commissioning of
all sorts of substations, having different bus configurations and of
different voltage levels upto and including 500 KV. We are the only
construction company in Pakistan having the capability of handling
turnkey Substation projects. The List of Turnkey Substation projects
built by ICC for WAPDA, KESC and Private parties are given in the
company's brochure attached.
Latest technology is
used in the construction of substations and design works. We are well
known to most of the concerned multinational companies who have
established offices in Pakistan. Impressed by our skill, M/s ABB had
awarded contract of supervising and testing their substations at
Kohinoor Energy and Gul Ahmed Power Plants, thus saving a substantial
amount of cost on account of expatriates. We have completed 132 kV
Substation, on turnkey basis for Ittefaq Sons (Pvt) Limited.
Transmission Line is of course only one dimension of ICC’s varied scope
of activities. ICC also specializes in design and construction of Power
For the first time in
Pakistan a Pakistani company, ICC was awarded the project as Main
Contractor to construct a complete Thermal Power Station by Pakistan
Steel Mills, Karachi.
We have executed
complete Mechanical works of 4x323 MW Hub Power Plant. This is the first
Power Plant built in the Private Sector and we participated in it as
Sub-contractors to M/S Ansaldo for Electro-Mechanical works consisting
of 4 Nos. Turbines and Generators, Water intake system, Chlorination and
Hydrogen Plant, Feed Water and Condensate Piping System, Electrical
works such as Transformers, Switchgear and cabling etc. Total Tonnage of
this Project was about 8,000 Tons.
We have also executing
complete Mechanical Erection of balance works of 412 MW Rousch Power
Plant. This Plant owned by Rousch Power Company with Siemens being EPC
Contractor and Lahmeyer as Consultants. The Balance Equipment of this
plant at Abdul Hakeem (near Multan) which was awarded to M/S Black &
Veatch International of USA and was further sub-contracted in total to
ICC was also engaged in
the Mechanical Erection of Hydel Turbines, Generators, Control and Power
Cables for Mangla Units 7&8 of 125 MVA each. It was also the turnkey
contract for design, supply, erection, testing and commissioning of the
entire Medium and High Voltage Switchgear for the above units. We also
completed stator erection of 432 MW generator stator for Tarbela hydel
power station units 11-14, and were also responsible as Main Contractors
for the design and supply of control and protection of the 432 MW
turbines and generators at Tarbela units 11-14.